HI-series Hydraulic intensifier
Description
The HI series are utilized to pressurize fluid samples. They are dual chamber cylinders comprising a low pressure (LP) chamber and a high pressure (HP) chamber. The chambers are separated by a dual piston rod. The LP chamber has a greater cross sectional area than that of the HP, therefore a pressurized fluid injection in the LP chamber will result in the multiplication of the fluid pressure inside the HP chamber by a factor equal to the ratio of the two piston cross sectional areas. Consequently, pressures up to 150Kpsi can be achieved by using a commercially available lower pressure (15 Kpsi) pump. The apparatus can be manufactured from Stainless Steel or hastelloy.
Features
Model
|
Ratio
|
HP end vol.
(ml)
|
HP end pressure
(psi)
|
HP end ID
(mm)
|
HP end stroke
(mm)
|
LP end pressure
(psi)
|
LP end ID
(mm)
|
HI 2 |
2:1 |
50 |
20,000 |
25.46 |
98.24 |
10,000 |
36 |
HI 4 |
4:1 |
25 |
40,000 |
18.00 |
98.24 |
10,000 |
36 |
HI 6 |
6:1 |
20 |
60,000 |
14.70 |
117.89 |
10,000 |
36 |
HI 8 |
8:1 |
15 |
80,000 |
12.73 |
117.89 |
10,000 |
36 |
HI 10 |
10:1 |
10 |
10,000 |
11.38 |
98.24 |
10,000 |
36 |
HI 15 |
15:1 |
5 |
150,000 |
9.30 |
73.68 |
10,000 |
36 |
ADDITIONAL FEATURES:
Temperature: ambient
Thread connection: ¼” FNPT (Low pressure side ) and ¼” FHP (High pressure side)
Wetted parts: Stainless steel or hastelloy
Weight: Approx. 22 Kg
Length: 600 mm
Diameter: 90 mm to 120 mm depending on the model.