CATATEST AMS - Bench-scale E-Ammonia synthesis unit

Description

This laboratory-scale unit is a dedicated configuration of Vinci Technologies’ CATATEST platform, inspired by the AMS platform, for catalytic ammonia synthesis. It supports catalyst performance studies with reduced feed loads, kinetic testing and scale-up preparation, with controlled gas feed delivery and product measurement.

Application and objectives

The unit enables researchers to evaluate heterogeneous catalyst activity, selectivity and stability during ammonia synthesis via the Haber-Bosch process. Typical operating conditions range from 400 to 500 °C and 150 to 200 bar using iron-based catalysts, supporting applications in fertilizer production and hydrogen carrier development. Independent adjustment of hydrogen and nitrogen flow rates, feed composition, pressure and reactor temperature profile allows the influence of operating conditions to be investigated. Accurate effluent recovery and gas metering support product characterisation and reliable material balances.

Feed preparation and delivery

Hydrogen and nitrogen feedstocks are individually regulated through Bronkhorst thermal mass flow controllers (MFCs rated up to 200 bar) delivering 0.15 to 5.0 Nl/h per line. The gases are mixed and pass through a 20 mL SS 316 preheater (rated up to 200 °C and 200 barg) prior to entering the reactor.

Reaction section

The preheated synthesis gas enters a 40 cm³ SS 316 down-flow fixed-bed reactor (450 mm length) accommodating up to 15 cm³ of catalyst. A three-zone conduction furnace (three independent 150 mm heating zones, operating from 50 to 550 °C) maintains a precise isothermal temperature profile along the catalyst bed.

Separation and product measurement

An automated, heated dome-loaded back-pressure regulator (rated up to 200 barg) maintains stable operating pressure downstream of the reactor, with the outlet line heated up to 120 °C. Any liquid leaving the regulator is collected in a 1 L knock-out pot. The gas effluent exits from the top, passes through a Coriolis mass flow meter (up to 2 kg/h) for pressure- and temperature-independent mass balance measurement, and can be routed to a customer-supplied gas chromatograph via an included connection kit.

Operating basis and supervision

Maximum operating limits are 200 barg and 550 °C; actual test conditions depend on the selected catalyst and experimental programme. A PC supervision system with real-time trends, automatic data logging and Excel export provides process control, alongside a comprehensive safety system featuring an integrated NH₃ detector, alarms, hardwired fail-safe switches, emergency stop, relief valves and a ventilated enclosure.

Features