Overview

Click to download the brochure MOS_Platform_Brochure.pdf

Description

MOS — Methanol and Oxygenates Synthesis Platform

The MOS is Vinci Technologies’ modular platform for catalytic methanol synthesis and downstream conversion to dimethyl ether and gasoline-range hydrocarbons. Its common gas-feed and analytical architecture supports catalyst screening, kinetic studies and process development, with each unit configured for the carbon source, catalysts and target products.

Markets and applications

1. E-Fuels and Green Chemicals

Feedstocks: CO₂ and hydrogen, or conditioned syngas derived from biomass, waste or other suitable carbon sources.

Applications: Methanol synthesis for e-methanol and bio-methanol production routes, dimethyl ether synthesis and methanol-to-gasoline conversion. The platform supports comparison of carbon sources and investigation of feed composition, hydrogen-to-carbon ratio and gas recycle.

2. Chemicals and Petrochemicals

Feedstocks: Conditioned CO/CO₂/H₂ mixtures, methanol and dimethyl ether.

Applications: Catalytic methanol synthesis, methanol dehydration to dimethyl ether and conversion of methanol or DME into gasoline-range hydrocarbons. Studies assess catalyst activity, conversion, selectivity and stability, together with the influence of water and operating conditions.

Flexible reactor configuration

Methanol synthesis forms the core of the platform, with reactor configuration, catalyst volume and thermal control selected for each project. Controlled heating, heat removal and temperature measurement support the study of the exothermic synthesis reaction. Dedicated DME and MTG modules extend the platform with their own catalysts, operating conditions and separation systems. Reactors can be arranged in successive stages where required by the selected route.

Feed handling and product recovery

Metered CO, CO₂, hydrogen and inert gases are blended at controlled ratios before entering the synthesis section. Gas recycle can return unconverted reactants to the reactor at a controlled rate. Downstream cooling and condensation recover crude methanol and water, while dedicated separation modules handle DME or the gas, hydrocarbon and aqueous streams produced during MTG conversion. Gas and liquid measurement, sampling and analysis support product characterisation and material balances.

Supervision and customisation

The supervision system monitors operating conditions, records experimental data and manages the configured control and safety functions. Rated pressure, operating temperature, feed capacity, catalyst volume, materials and separation capacity are established for each project. Options include CO₂-rich feed simulation, automated gas recycle, reactor series operation, dedicated DME separation, MTG upgrading and extended product analysis.