Overview

Description

These pilot plants are dedicated configurations of Vinci Technologies’ HSP — Hydrogen and Syngas platform for syngas generation, hydrogen enrichment and CO₂ conversion. They support catalyst screening, reaction engineering and process development, with controlled feed delivery and product gas measurement. Each unit incorporates the reaction modules required for the selected process or combination of processes.

Application and objectives

The units enable researchers to investigate steam methane reforming (SMR), autothermal reforming (ATR), partial oxidation (POX), water-gas shift (WGS) and reverse water-gas shift (RWGS). Independent adjustment of feed composition, gas flow, steam ratio, pressure and reactor temperature allows their influence on conversion and product composition to be evaluated. Studies assess catalyst activity, selectivity and stability, hydrogen yield, H₂/CO ratio and carbon formation.

Feed preparation and conditioning

Gaseous hydrocarbons, hydrogen, carbon monoxide, carbon dioxide and inert gases are regulated through mass flow controllers. A metered water supply and steam generation system deliver steam where required. Suitable liquid feedstocks are introduced through dedicated metering and vaporisation equipment. Mixing and preheating prepare the reactor feed, while ATR and POX configurations incorporate process-specific oxygen delivery and injection systems. Nitrogen is available for purging and inerting.

Reaction section

The reaction section is configured for the selected chemistry, catalyst and heat balance. SMR uses external heating to supply the heat required for methane reforming, while ATR combines partial oxidation and steam reforming with controlled oxygen addition. POX uses a dedicated catalytic or non-catalytic reactor arrangement. WGS and RWGS modules provide the thermal conditions required for hydrogen enrichment or CO₂-to-CO conversion. Multipoint temperature measurement supports monitoring of reaction profiles and thermal transients.

Separation and product measurement

Downstream cooling and gas–liquid separation remove condensed water and any other condensable components from the reactor effluent. Pressure regulation maintains the selected operating conditions. Product gas flow measurement and online or offline composition analysis, such as micro-GC, support conversion calculations, hydrogen yield assessment and material balances. Optional gas recycle and downstream conditioning can be incorporated according to the experimental programme.

Operating basis and supervision

Operating pressure, temperature, feed capacity, catalyst volume and materials are defined for each project according to the selected process. Combined modular plants can share selected feed, steam generation, cooling and analytical systems while retaining dedicated reaction modules and protective functions. A PLC/HMI supervision system provides process control, data acquisition, operating sequences, alarms and emergency shutdown functions.