Description
This compact, entry-level unit is a dedicated configuration of Vinci Technologies’ MCB (Micro Catalyst Bed) platform, inspired by the FTS platform, for micro-scale Fischer-Tropsch synthesis. It supports catalyst formulation screening with very small catalyst loads, kinetic studies, and academic teaching or training, with controlled gas feed delivery and product measurement.
Application and objectives
The unit enables researchers and students to evaluate heterogeneous catalyst activity, selectivity and stability during the conversion of synthesis gas into liquid hydrocarbons. It supports both high-temperature (HT-FT, 350 °C, 30 barg, iron-based catalysts for C5–C12 gasoline-range hydrocarbons) and low-temperature (LT-FT, 220 °C, 30 barg, cobalt-based catalysts for C12–C20 diesel-range hydrocarbons) routes. Independent adjustment of gas flow rates, feed composition, pressure and reactor temperature allows the influence of operating conditions to be investigated. Reliable gas and liquid recovery supports product characterisation and complete material balances.
Feed preparation and delivery
The gas feedstock—comprising CO₂, CO, H₂ and N₂—is individually regulated through Bronkhorst mass flow controllers (MFCs rated up to 60 bar). Feed lines are sized for low gas consumption, delivering 0.30 to 10.0 Nl/h for H₂ and 0.15 to 5.0 Nl/h for CO, CO₂ and N₂. A 1/8" 3D-printed stainless steel static mixer homogenises the gases prior to entering the reactor.
Reaction section
The mixed synthesis gas enters a 10 cm³ SS 316 down-flow fixed-bed reactor accommodating up to 3 cm³ of catalyst. A split-tube conduction furnace (operating from 50 to 550 °C) maintains an isothermal temperature profile along the micro-catalyst bed.
Separation and product measurement
The reactor effluent crosses a heated wax trap (up to 250 °C) equipped with a glass recovery bottle, followed by a condenser and a three-phase separator with NIR level detection where water is collected and liquid hydrocarbons are recovered. Liquid hydrocarbon samples are collected via an automatic selector into three 50 mL bottles. System pressure is regulated by an automated back-pressure regulator (BPR) up to 200 barg. The outlet gas leaves through a Coriolis mass flow meter (up to 2 kg/h) and can be routed to a customer-supplied gas chromatograph.
Operating basis and supervision
Maximum operating limits are 200 barg and 550 °C; actual test conditions depend on the selected catalyst and experimental programme. Housed in a bench-scale 1 × 1 × 1 m footprint (~60 kg), the unit features fully automated PC supervision with preconfigured software, real-time trends, automatic data logging and Excel export. A comprehensive safety system—including alarms, hardwired fail-safe switches, emergency stop, relief valves and a ventilated enclosure—ensures safe operation in laboratory and classroom environments.