Description
This compact, entry-level unit is a dedicated configuration of Vinci Technologies’ MCB (Micro Catalyst Bed) platform, inspired by the MOS platform, for micro-scale catalytic methanol synthesis. It supports catalyst formulation screening with very small catalyst loads, kinetic studies, and academic teaching or training, with controlled gas feed delivery and product measurement.
Application and objectives
Designed for evaluating heterogeneous catalysts (such as Cu/ZnO/Al₂O₃) in methanol synthesis from CO, CO₂ and H₂, the unit operates typically between 200–300 °C and 50–100 bar. Independent control of flows, composition, pressure, and temperature allows comprehensive kinetic studies and full material balance calculations.
Feed preparation and delivery
Reactant gases (CO, CO₂, H₂, N₂) are metered via individual Bronkhorst mass flow controllers (rated up to 100 bar) with low-consumption flow ranges (e.g., 1.0–30 Nl/h for H₂) and mixed prior to the reactor.
Reaction section
Synthesis gas enters a 10 cm³ SS 316 down-flow fixed-bed reactor holding up to 3 cm³ of catalyst, maintained under an isothermal profile by a split-tube conduction furnace (50–550 °C).
Separation and product measurement
Effluent passes through an automated back-pressure regulator into a cooled SS 316L gas-liquid separator. Liquid products collect in a 1 L borosilicate bottle (with automated 3-position liquid sampling), while exit gas flow is tracked by a Coriolis meter up to 2 kg/h for mass balancing and optional gas chromatography analysis.
Operating basis and supervision
The bench-scale unit (1 × 1 × 1 m, ~60 kg, 110/220 VAC) withstands up to 550 °C and 200 barg. It features PC supervision with real-time logging and Excel export, alongside comprehensive safety systems (alarms, fail-safe switches, relief valves, and a ventilated enclosure).