Description
This compact, entry-level unit is a dedicated configuration of Vinci Technologies’ MCB (Micro Catalyst Bed) platform, inspired by the MOS (Methanol and Oxygenates Synthesis) platform, for micro-scale catalytic methanol synthesis. It supports catalyst formulation screening with very small catalyst loads, kinetic studies, and academic teaching or training, with controlled gas feed delivery and product measurement.
Application and objectives
The unit evaluates heterogeneous catalyst activity, selectivity, and stability for methanol synthesis from CO, CO2 (e-methanol route), and H2 under typical conditions of 200–300 °C and 50–100 bar, utilizing catalysts such as Cu/ZnO/Al2O3 for applications in synthetic fuels and chemical feedstocks.
Feed preparation and delivery
Individual Bronkhorst mass flow controllers (rated up to 100 bar) regulate CO, CO2, H2, and N2 gas feedstocks at low flow rates (e.g., H2 at 1.0 to 30 Nl/h) before mixing them prior to reactor entry.
Reaction section
Synthesis gas enters a 10 cm³ SS 316 down-flow fixed-bed reactor holding up to 3 cm³ of catalyst, maintained at an isothermal temperature profile by a split-tube conduction furnace (50–550 °C).
Separation and product measurement
Reactor effluent passes through an automated back-pressure regulator (up to 200 barg) into a water-cooled SS 316L gas-liquid separator. Liquids collect in a 1 L borosilicate bottle (with three 50 mL automated sampling bottles), while off-gases pass through a Coriolis mass flow meter (up to 2 kg/h) for mass balance and gas chromatograph routing.
Operating basis and supervision
Designed for a maximum of 200 barg and 550 °C, the bench-scale unit (1 × 1 × 1 m, ~60 kg, 110/220 VAC) offers automated PC supervision with real-time logging and a full safety system including alarms, fail-safe switches, relief valves, and a ventilated enclosure.