Overview

Description

PCC — Petrochemical Catalytic Conversion Platform

The PCC is Vinci Technologies’ modular platform for catalytic conversion of light hydrocarbons and naphtha-range fractions into olefins, aromatics and improved fuel components. Its common instrumentation, control and analytical architecture supports catalyst screening, kinetic studies and process development, with dedicated reaction modules configured for each feedstock, catalyst and target product.

Markets and applications

1. Conventional Fuels

Feedstocks: Naphtha, paraffinic hydrocarbon cuts, C₅–C₆ normal paraffins, isobutane and light olefins.

Applications: Naphtha catalytic reforming for high-octane, aromatic-rich reformate and hydrogen production; light naphtha isomerization for higher-octane isomerate; and solid acid alkylation for highly branched gasoline blending components. Studies evaluate catalyst performance, product distribution and fuel component yields.

2. Chemicals and Petrochemicals

Feedstocks: Propane, n-butane and suitable light hydrocarbon streams.

Applications: Propane dehydrogenation (PDH) for propylene production, non-oxidative butane dehydrogenation for butenes and potentially 1,3-butadiene, and light hydrocarbon aromatization for benzene, toluene and xylenes (BTX). Studies investigate conversion, selectivity, hydrogen coproduct yield, coke formation and catalyst stability.

Flexible reactor configuration

The platform covers six processes: naphtha catalytic reforming, propane dehydrogenation, non-oxidative butane dehydrogenation, light naphtha isomerization, light hydrocarbon aromatization and solid acid alkylation. Process-specific fixed-bed or other suitable reactor modules provide the required catalyst environment and thermal control. Compatible configurations can share selected feed, utility and analytical systems, while parallel reactors support catalyst comparison. Solid acid alkylation is configured as a dedicated pilot plant with its own reaction, heat removal and catalyst handling requirements.

Feed handling and product recovery

Metered gas and liquid feed systems deliver hydrocarbons, with hydrogen or diluent gases added where required. Feed purification, blending, vaporisation and preheating are selected for the process and catalyst. Downstream quenching and cooling limit unwanted secondary reactions before gas–liquid separation and product collection. Gas flow measurement, hydrogen analysis and gas and liquid composition measurements support conversion assessment, selectivity calculations and material balances.

Supervision and customisation

A PLC/HMI supervision system monitors operating conditions, records experimental data and manages operating sequences and process-specific interlocks. Reactor design, operating pressure and temperature, feed capacity, catalyst volume, materials and analytical scope are established for each project. Options include parallel catalyst reactors, custom vaporisers, online regeneration, catalyst activation and passivation provisions, hydrogen analysis and liquid hydrocarbon fractionation packages.