Flow through core cleaner


A rapid and efficient core cleaning system based on controlled sequential solvent displacements at moderate pressures. The standard version is delivered with a single core holder but multiple can be integrated into the assembly upon request. Samples are placed in a quick release Hassler core holder which can be heated up to 80°C. Clean solvents are injected through the core via the constant rate-operable HPLC pump. The clean solvent can be pumped directly from any of the four tanks. After exiting the core, the solvent flows directly through a BPR and into a large capacity waste tank. Cores are considered clean when the effluent is clean.


Maximum confining pressure: 1,000 psi
Core diameter: 1.5" (other upon request)
Core length: Up to 3" (other upon request)
Fluid flow rate: 5 cc/min (recommended)
Wetted parts: Stainless steel
Electrical: 110-220 VAC, 50 or 60 Hz
Weight: 40Kg


* Possibility to pump different solvents
* Constant injection flow for solvent
* Easy core loading and unloading operation
* Cleaning at pressure for high permeability sample