SAP-series Sand pack system

Description

The sand pack system provides an alternative porous medium to perform EOR studies at reservoir conditions of temperature and pressure. The sand pack is a HP-HT tube which is filled with calibrated sand having a known grain geometry. Optionally, several pressure taps can be integrated along the tube to monitor the pressure gradient as a function of injection distance. The versatile apparatus warrants various EOR tests including water flooding, polymer injection, ASP injection, miscible and immiscible gas flooding, microbial flooding and steam injection. Critical parameters such as displacement efficiency and improved oil recovery can be determined from the results. The system can be upgraded with a number of modules such as the capillary sight glass and foam generator. The Sand Pack System is an essential device for a Petroleum Engineering laboratory as it does not require reservoir rock sample procurement & preparation.

Features

Maximum pore pressure: 700 bar (10,000 psi)
Maximum working temperature: 150°C
Tube diameter: 1”5 (other upon request)
Tube length: 100 cm (other upon request)
Pressure taps: 6 (other upon request)
Position: Horizontal
Wetted parts: Stainless steel
Power supply: 220VAC, 50Hz
Air Pressure requirements: 7 bar (100 psi)