GEOTEST-Rock triaxial testing system - ASTM D7012, D7070


The GEOTEST is an advanced rock triaxial test apparatus that excellently carries out triaxial, creep tests and post-failure behavior. An ample range of geo-mechanical properties can be determined under triaxial compression conditions such as rock deformation properties, rock compressive strength and static elastic constants. Optional fixtures are available to enhance the capabilities of the system to perform unconfined compressive strength, indirect tensile strength, acoustic velocity, dynamic elastic constants, rock permeability, rock compressibility, polyaxial compression, hydraulic fracturing and acoustic emission tests. A hydraulic compression frame applies axial loads on a sample mounted in a balanced triaxial cell. The system allows static and cyclic tests to be executed. The stress testing possibilities are virtually endless within the scope of the device’s physical limits and experiments can be conducted under stress feedback, strain or manual control. Rapid specimen loading and enhanced system productivity are achieved by virtue of an integrated hydraulic cell setup mechanism, specifically the sample is mounted and instrumented on the cell pedestal; subsequently the cell body lowered and firmly locked against the pedestal and then brought under the piston loading area.

For more information, please visit Floxlab's website: floxlab


Manufacturer: Floxlab
Compression load capacity: 1,000 / 2,000 / 4500 kN
Max confining pressure : 70  /140 / 210 MPa
Max pore pressure : 70  /140 / 210 MPa
Working temperature : ambient (High temperature option available)
Core diameter: up to 100-mm
Core length : twice the diameter
Wetted parts: Stainless steel
Power supply: 230-400 VAC 3-Phases, 50/60Hz 


* Uses a balanced triaxial cell equipped with in-vessel radial and axial strain sensors
* Automated tests with pre-programed stress and strain path
* Static and cyclic tests
* Heavy-duty, stiff, noise-free compression frame
* Rapid specimen loading facilities